Christmas Light Installation in Corvallis, Albany and Eugene
Christmas and holiday lights hung across the Willamette Valley. We hang them, secure them, come back if a run fails, and take everything down in January. Nobody in your household ends up on a wet ladder in December. Insured to $2 million, Corvallis based since 2022, and booking for the 2026 season is open now.
Last reviewed 13 September 2026 by GreenTree Services, Corvallis. At every update we confirm the prices and methods here still match current field practice.
On this page
- How long is the Oregon holiday light season?
- What does a holiday light service include?
- Christmas lights in Oregon: timing, coverage and cost
- When should I book Christmas lights in Oregon?
- What cities do you install Christmas lights in?
- How much does Christmas light installation cost in Oregon?
- Do you remove holiday lights in January?
- What does holiday light removal actually involve?
- Is it safe to install Christmas lights yourself in Oregon?
- The Willamette Valley holiday lighting calendar
- Why does the Oregon holiday light calendar fill so early?
- A holiday light installation service, not just an install day
How long is the Oregon holiday light season?
Roughly ten weeks of installation from early November, then removal through January. Oregon’s wet season runs October to May with more than 150 wet days a year, according to the NOAA Portland office. Consequently every clip, connection and run has to survive ten weeks of continuous rain rather than a dry display season. That is the single biggest difference between an Oregon install and a catalogue one.
What does a holiday light service include?
A full holiday light service covers the whole season rather than the day the lights go up, from design through to January removal. It has four stages:
- Walkthrough, design and a written quote covering rooflines, trees and entry features
- Installation in November using shingle and gutter clips rather than staples or nails
- Mid-season maintenance, so a run that goes dark in December gets repaired
- January removal of every strand, clip and fastener, included in the original price
Install-only pricing, by comparison, leaves removal as a second invoice or as your problem in the worst weather of the year.
Christmas lights in Oregon: timing, coverage and cost
The three things people want to know before they call, answered directly.
When should I book Christmas lights in Oregon?
October. Installation runs through November, and the calendar is usually full by the middle of that month. Booking in December means choosing from whatever is left, usually on a wet day in the dark. There is a practical reason the window is that tight: the Willamette Valley gets its heaviest rain from November, and hanging lights safely needs dry-enough conditions and daylight. We contact last season’s customers first, so booking earlier means more choice over your install date.
What cities do you install Christmas lights in?
Corvallis, Albany, Eugene, Springfield, Philomath and Lebanon, across Benton, Linn and Lane counties. Searching holiday light installation near me from anywhere in the mid Willamette Valley puts you inside our service area, and there is no trip fee within it. Christmas light installation Eugene and Springfield customers book runs from the same crews and the same calendar as Corvallis, so book them together. Professional Christmas lights in Eugene are not a separate operation for us, they are the same November route.
How much does Christmas light installation cost in Oregon?
It is quoted per property, because linear footage, roof height, pitch, tree count and access vary far more between homes than they do for a driveway or a gutter run. A walkthrough produces a written figure, and we lock that figure before anything goes up. See the holiday light installation cost page for how the quote is built. Booking lights alongside gutter cleaning lowers the combined total, and the order matters: gutters should be clear before anything is clipped to them.
Do you remove holiday lights in January?
Yes, and removal is inside the original quote rather than billed as a second job. Everything we installed comes down, clips and fasteners included, so nothing is left on the fascia to corrode through the year. January in the Willamette Valley is wet, dark and the worst month of the twelve to be on a ladder, which is precisely why most installers price removal separately or hand it back to the homeowner. Lights somebody else put up, we will take down too.
What does holiday light removal actually involve?
More than pulling the strands off. Clips and fasteners come off the roof edge and gutter line, strands are coiled and labelled by run so next season goes up faster, timers and stakes are collected, and the fascia is checked for anything the season loosened. Lights left clipped past February trap water against the roof edge, and the clips themselves mark paint if they sit through a full Oregon summer.
Is it safe to install Christmas lights yourself in Oregon?
November and December here mean wet roofs, wet ladders and about eight hours of daylight. Ladder falls are a leading cause of serious home injury, and holiday lights are one of the most common reasons people are up there, as OSHA documents. The other half of the problem is January, when the lights have to come down in worse weather than they went up in. We include takedown in the job.
The Willamette Valley holiday lighting calendar
It is mid-September. Here is exactly where you are in the year and what that means for getting the date you want.
👉 September to now
Booking opens. Best availability of the whole season, and the only point where you genuinely pick your install date.
October
Peak booking. Also the right month for gutter cleaning, so most customers do both in one visit.
November
Installation month. The calendar is typically full by mid-November.
December
Mid-season maintenance. If a run fails we come back out.
January
Takedown. Everything removed including clips and fasteners, included in the original quote.
Why does the Oregon holiday light calendar fill so early?
Because the installation window is genuinely narrow here. Lights need dry-enough conditions and daylight to hang safely, and the Willamette Valley gets most of its 40-plus inches of rain from November through March. That leaves a few usable weeks, shared across every property that wants lights up by Thanksgiving. It is not artificial scarcity, it is the weather.
A holiday light installation service, not just an install day
Residential holiday light installation here covers the whole season. The difference between a service and someone hanging lights is what happens in the eleven weeks afterwards.
Walkthrough and design
Rooflines, gutter lines, trees, entry features. Measured, quoted in writing, locked before we order anything.
Installation in November
Hung with shingle clips and gutter clips rather than staples or nails. Commercial-grade LED strands, secured against valley wind and routed so the cables are not what you notice.
Mid-season maintenance
A run goes dark in early December and we come back. That is the point of hiring someone rather than doing it yourself.
January takedown
Everything removed, clips and fasteners included. No one in your household on a ladder in January weather.
Do you install lights on trees as well as rooflines?
Yes. Tree lighting and landscape lighting run alongside roofline and gutter-line work. Trees take longer because the work is done by hand around the branch structure rather than clipped along a straight edge. Mention them at the quote stage rather than as an addition on the day. Professional tree light installation is the part most people underestimate, and the part that changes how a property reads from the street.
Why is one Christmas light installation quote cheaper than another?
The gap here is not materials. It is whether the quote covers the whole season or just the day the lights go up.
| What we do | What commonly happens instead |
|---|---|
| Commercial Christmas lights and residential, same terms | Commercial quoted as an afterthought, with takedown billed separately. |
| Takedown in January included in the quote | Install only. January becomes your problem, or a second invoice. |
| Mid-season callouts for failed runs | Hung and gone. A dark section in December stays dark. |
| Shingle clips and gutter clips sized to the roof edge | Staples and nails, which put holes in fascia and shingles that stay there. |
| Cable routing planned so it is not the feature | Cables run the shortest way, visible across the front of the house. |
| Gutters checked and cleared first | Lights clipped onto gutters already packed with fir needles. |
| Secured against valley wind and rain | Light-duty fixing that comes loose in the first December storm. |
| $2M insured on every job | Uninsured, and a fall from your roof becomes your liability. |
Staples and nails are the one worth checking before you hire anyone. They are faster to install and they leave permanent holes in fascia board and shingles, which in an Oregon winter is where water gets in. A cheaper install that puts fifty holes along your roof edge is not cheaper.
Holiday light installation Eugene, Corvallis, Albany and beyond
Benton, Linn and Lane counties, no trip fee inside the service area.
Cities
ZIP codes: Corvallis 97330, 97331, 97333, 97339 · Albany 97321, 97322 · Eugene 97401 to 97405 · Springfield 97477, 97478 · Philomath 97370 · Lebanon 97355.
Our five specialties
What holiday light installation costs in the Willamette Valley
We price at the local market average rather than above or below it. These are the figures the valley actually runs on, and they include installation, the season, takedown in January, and storage.
| Scope | Typical property | Price |
|---|---|---|
| Roofline only | Single-storey, roughly 100 linear feet | $400 to $700 |
| Roofline only | Two-storey or complex peaks, 150 to 200 feet | $700 to $1100 |
| Roofline plus accents | Windows, doorways and one or two trees | $800 to $1300 |
| Tree wrapping | Priced per tree by height and trunk spread | $75 to $400 |
| Shrubs and low planting | Per shrub, usually added to a roofline job | $10 to $20 |
| Takedown and storage | Included on every install we do | Included |
| Takedown only | Lights someone else installed | $90 to $350 |
| All-in per linear foot | Commercial-grade lights, labour, install | $4 to $8 |
Takedown and storage are inside the price, not added in January. That is worth checking on any quote you compare, because a figure that looks lower in October often separates the removal visit into a second invoice. Ours does not.
Booking more than one service gets a bundle discount of 10% to 10% to 25%, scaled to how many services are on the job. Holiday lights combined with autumn gutter cleaning is the common pairing, since the crew is already working the roofline.
The season, stage by stage
| Stage | When | What it covers |
|---|---|---|
| Design walkthrough | September to October | Roofline measured, power access checked, clip type matched to the gutter and shingle profile. |
| Installation | Early November | Commercial-grade product installed and tested, timers set, every run powered and checked before we leave. |
| Mid-season service | November to December | Any outage repaired at no extra charge, because Oregon rain finds every weak connection eventually. |
| Takedown | January | Everything removed, labelled and stored, so next season starts with a known layout rather than a box of tangles. |
| Storage | February onward | Product held between seasons, which is what makes the second year cheaper than the first. |
What Willamette Valley customers say
5.0 across 13 reviews. Read them all →
★★★★★
I highly recommend this company for their professionalism in the excellent quality of their work, attention to detail, customer service, dependability, conscientiousness, and personal integrity.Pam G.
★★★★★
Very nice, respectful young men. They worked really hard! I would use them again!Jerry V.
★★★★★
Great service. Very efficient and polite.Barbara R.
Christmas and holiday lights: frequently asked questions
Ten questions, matching the FAQ schema on this page exactly.
When should I book Christmas lights in Oregon?
Book in October. Installation runs through November, and the calendar is usually full by the middle of that month. Waiting until December means competing for the few slots left, often in the rain. Anyone booking in late November in the Willamette Valley is choosing from what is left rather than what they wanted.
What cities do you install holiday lights in?
Corvallis, Albany, Eugene, Springfield, Philomath and Lebanon, across Benton, Linn and Lane counties. Holiday light installation near me searches from anywhere in the mid Willamette Valley land inside our service area, and there is no trip fee within it.
Do you remove holiday lights in January?
Yes, and removal is inside the original quote rather than billed as a second job. Everything we installed comes down, clips and fasteners included, so nothing is left on the fascia to corrode through the year. Lights that somebody else put up we will take down too.
What does holiday light removal involve?
Clips and fasteners come off the roof edge and gutter line. Strands are coiled and labelled by run so next season goes up faster. Timers and stakes are collected, and the fascia is checked for anything the season loosened. Lights left clipped past February trap water against the roof edge.
Do you take the lights down in January?
Yes. Takedown in January is part of the job, not an extra call. We remove everything we installed, including clips and fasteners, and nobody in your household needs to get on a ladder in January weather to do it.
Do you install lights on trees?
Yes. Tree lighting and landscape lighting are part of the service alongside rooflines and gutter lines. Trees take longer than a roofline because the work is done by hand around the branch structure. Mention them when you book rather than adding on the day.
Is it safe to install Christmas lights yourself in Oregon?
November and December in the Willamette Valley mean wet roofs, wet ladders and short daylight. Ladder falls are a leading cause of serious home injury and hanging Christmas lights is one of the most common reasons people are up there. GreenTree carries $2 million in general liability insurance on every job.
How much does Christmas light installation cost in Oregon?
It is quoted per property. Linear footage, roof height, pitch, tree count and access vary enormously between homes. A walkthrough produces a written figure, and we lock it before any work starts. See the holiday light installation cost page for how the quote is built.
What happens if a light fails during the season?
Tell us and we come back out. Mid-season maintenance is part of the arrangement. A run that goes dark in the first week of December is the whole point of hiring someone.
Do you do commercial Christmas lights?
Yes. Storefronts, business parks, apartment complexes and property management portfolios. We schedule commercial work around your open hours, quote it against a written scope, and include the same January takedown.
Can you install holiday lights while doing gutter cleaning?
Yes, and it is the sensible order. October and November are the right window for gutter cleaning in Oregon and the right window for light installation. Doing both in one visit means one setup, one ladder, and the gutters are clear before anything is clipped to them.
How far in advance does the calendar fill?
Booking opens in October and the November installation calendar is typically full by mid-November. We contact the previous season’s customers first, so the earlier you get on the list the more choice you have over the install date.
Get on the 2026 holiday light list
Written, price-locked quote. Reply within 2 hours during business hours, Mon to Sat 7am to 7pm. Install, mid-season maintenance and January takedown, all in one figure.
GreenTree Services, 1460 NW Van Buren Ave, Corvallis, OR 97330 · (971) 280-2861 · Oregon Registry #2424331-91
Sources and standards: OSHA ladder safety · NOAA Portland rainfall data · Verify Oregon Registry #2424331-91